15 Years Factory wholesale Factory Free sample Excellent quality for Stainless Steel Expansion Anchor Bolt for Haiti Factory for Riyadh Houston
We support our buyers with ideal high quality products and high level service.Becoming the specialist manufacturer in this sector,we have gained rich practical experience in producing and managing.Our 15 Years Factory wholesale Factory Free sample Excellent quality for Stainless Steel Expansion Anchor Bolt for Haiti Factory for Riyadh Houston, We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!
This smart and stylish bolt through door pull handle is a great choice for locations where looks are just as important as function. The Guardsman style of door pull handle is a contemporary design, and in this variant has a chunky 25mm bar, giving you plenty to grip! The satin stainless steel finish also adds to the modern look, and there are four different lengths to choose from as well.
This high quality door pull handle is part of the Jedo Collection manufactured by Frelan Hardware.
Transforming scrap bullet casings, into a custom pair of fancy, and “dangerously decorative”, solid brass paperweights.
Free Template: http://bit.ly/StyroKnucklesTemplate
Common materials in the Mini Metal Foundry
[✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu
[✓] Steel Pail: http://amzn.to/2bSuGAC
[✓] Plaster of Paris: http://amzn.to/2bZ0cf0
[✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk
[✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz
[✓] Heat Resistant Gloves: http://amzn.to/2bSv02d
[✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z
[✓] 3” Hole Saw: http://amzn.to/2cib3kQ
[✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU
Mad Science Minion: https://goo.gl/4tVJdy
Micro X-Bow: https://goo.gl/XgUPth
Magic Mud: https://goo.gl/5dtyXP
Ninja Balls: http://bit.ly/SquishyNinjaBalls
Next Video: The Styro-Slicer: https://goo.gl/AO7ZaJ
Previous Video: How To Build A Rocket (From Scratch): https://goo.gl/wH55Kx
See What Else I’m Up To:
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: http://www.youtube.com/thekingofrandom/about
Brass Knuckles are illegal in most countries, and metal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. The heat from the foundry can easily burn, and inhaling excessive amounts of zinc fumes can cause metal fume fever. Use caution and common sense. Use of this video content is at your own risk.
TheFatRat – Licensed by Tasty
Song Title: Xenogenesis
Music Video: https://www.youtube.com/watch?v=_nabH…
Label Channel: http://youtube.com/tasty”
Project Inspired By:
An indirect suggestion my dad made for me to try and make something practical out of brass. He didn’t expect I’d end up making these!
Project History & More Info:
The weather has cooled off quite a bit, which has turned my interest back to keeping warm by casting metal.
This time round I wanted to play with higher temperature metals, like brass. So I made a trip to a local shooting range, and salvaged a whole bucket-load of spent brass casings.
Quite a few people have asked whether my backyard foundry can melt brass, and I was curious myself, so I threw a few handfuls of casings into a crucible and fired them up.
I tried using lump charcoal because it burns hotter and faster than briquettes, and a clay crucible purchased from the internet because it withstands heat better, and lasts longer than steel.
I was impressed that the brass melted down without hesitation, and I was able to easily cast mini brass muffins the same day.
A couple things worth mentioning are that the melting point of brass is around the boiling point of zinc. I noticed this in real-life when the metal started bubbling, and shooting out white flames. I wasn’t sure what it was until I looked it up, but it was most likely zinc oxide fumes being released.
Zinc Oxide can be toxic in large quantities, and although it’s never happened to me, claims are that it can cause metal fume fever, which gives flu like symptoms.
You should also know that brass is over 3 times heavier than aluminum, so expect the crucible to have a lot more weight to it, making it harder to handle.
My dad was visiting at the time and confirmed my thoughts about it by suggesting I try making something more practical and useful. So I thought it would be fun to make some “Brass Knuckle” paperweights.
I looked online at different varieties of brass knuckles, then drew my own version in photoshop, and used the “Styro-Slicer” and the lost-foam casting technique to make a rough pair of knuckles.
I cast another pair the same way, and spent another 8 hours sanding and buffing them up to a mirror finish, then wondered how I could take them to the next level.
Spikes seemed like a cool idea, inspired by a picture I saw on a google image search, so I stopped at an alternative clothing store and picked up a spiked choker collar, and repurposed the spikes for my piece of metal art.
These are not designed or intended to be used as weapons. Possession of Brass Knuckles is illegal in most countries, (but not where I live), however I created these simply for artistic expression, and use them mainly as workshop décor. (paperweights).