2016 New Style Flat Washers DIN125 for Industry Wholesale to Cancun
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 2016 New Style Flat Washers DIN125 for Industry Wholesale to Cancun, items won certifications with the regional and international primary authorities .For far more detailed information,please contact us!
A fastener is a hardware device that mechanically joins or affixes two or more objects together. Fasteners can also be used to close a container such as a bag, a box or an envelope or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc.
For orders please visit http://goo.gl/Ub75IF
From http://www.kevincaron.com – Artist Kevin Caron shares how to minimize warping while welding – and how to use it to your advantage …. While working on a stand for a new sound sculpture, Caron stops to talk about how he reduces warping, which can ruin precision work. Because the stand currently isn’t clamped down or welded to the table as he usually would, he is welding short sections on one side, then the other of the structure. He welds 3 – 4 inch sections at a time, then skips a foot-long section, then welds 3 – 4 more inches. Each time, he switches back and forth between the sides of the stand as he welds to counter the inevitable warpage that happens when welding metal. Then he comes back, splits the difference in the open foot-long section, welds, goes to the other side, welds there, then goes back and forth. When this top of the stand is completely welded, he’ll flip over the structure and weld the other side the same way, first welding the metal on one side, then on the other to pull it back from where it has moved during welding. Caron then explains how he has actually used the warpage to shape a sculpture called Genome Project. The sculpture started almost flat, but he intentionally started welding in one spot, welded up, then went to the opposite side and welded down, going back and forth to achieve a sweeping shape. But what about the nice long welds you see, including some on his own sculpture? Caron explains he tied together all the welds to get what looks like a single long weld by filling in the sections between his short, spaced welds. He explains that you don’t run over the short welds, but tie the welds together, which he’ll cover in another video. See more how-to videos at http://www.kevincaron.com