Best Price for 80% OFF Price For Galvanized Eye Screw DIN580 (M48) in Rio de Janeiro in kazan

Best Price for
 80% OFF Price For
 Galvanized Eye Screw DIN580 (M48) in Rio de Janeiro
 in kazan

Product Detail

Product Tags

We support our buyers with ideal high quality products and high level service.Becoming the specialist manufacturer in this sector,we have gained rich practical experience in producing and managing.Our Best Price for 80% OFF Price For Galvanized Eye Screw DIN580 (M48) in Rio de Janeiro in kazan, items won certifications with the regional and international primary authorities .For far more detailed information,please contact us!





  • 13.5″ Front Pro Brake System
    This system features the 6P 6-piston caliper mounted to a 13.5″ 1 piece slot, drill, zinc plated rotor. This is designed as a direct bolt on for the JK, and re-uses the factory hoses. The Pro was built to fit in many of the popular aftermarket 17″ wheels.

    Rotor Size/Type: 13.5″” 1-piece
    Piston Count: 6 piston
    Pad Type: Corvette C5/C6 Front pads (#D0731)
    Minimum Wheel Size: 17″ (Use template to verify fitment, link below)
    Includes: 6 piston calipers, 13.5″ rotors
    Notes: Designed to be used with stock 2007-2014 JK front spindle.

    Why Purchase the Pro+?
    Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
    Calipers have dust and weather seals
    Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
    Uses the same pad as the C5 (1997 – 2004) and C6 (2005 – 2012) Corvette for easy, cost effective pad replacement
    Everything needed per corner (including hoses and fittings) except for in General fit applications
    6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
    High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.
    Includes a set of 6061-T6 billet machined hubs with Timken or SKF bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.
    The 6P Pro+ Caliper Features:
    2-piece forged caliper design with six cross bolts for added strength
    Stainless steel pistons, abutments and noise suppression springs
    Staggered piston sizes to minimize pad wear
    Dual seals (dust/weather and pressure) to meet D.O.T specifications
    Caliper can accept 13″ and 14″ rotors.
    Machined logo that is hand painted
    Red, Black or Silver Powder Coat Finish (custom colors available)
    Uses the C5 and C5 backing plate (1997-2012 Corvette) or the FMSI #D731
    Available in Front or Rear for that same cosmetic matching look
    Rear systems incorporate a drum in hat park brake
    Rear systems for c-clip style axles include Baer’s Verislide self centering brackets
    Uses correct banjo style fittings, Baer does not use any pipe thread
    Can be custom ordered in front or rear configuration, with a variety of piston sizes
    100% MADE IN USA with US sourced material

    12″ Rear SS4 Brake System
    This system features the S4 4-piston caliper mounted to a 12.2″ 1 piece (stock size) slot, drill, zinc plated rotor. This system is designed to reuse the factory Jeep park brake assembly, and comes with Baer’s unique Verislide brackets to allow the 4 piston caliper to float with the stock C-clip axles.

    See below for further detailed information.

    Rotor Size/Type: 12″ 1-piece
    Piston Count: 4 piston
    Pad Type: Common 4 piston pad shared on the aftermarket (#DR1 or Hawks #HB100)
    Minimum Wheel Size: 16″ (Use template to verify fitment, link below)
    Includes: 4 piston calipers, 12.2″ slot, drill, zinc plated rotors
    Notes: Designed to be used with stock hoses, and uses the factory park brake assembly

    Longer adjustable upper and lower control arms and a high clearance belly cross member with belly pan allows for more turning radius and obstacle clearance. Consists of coil springs, ES9000 shocks, relocation hardware, and other replacement components that will fit the new specifications of your Jeep. Maintains a lower roll center for superior off road stability, articulation and excellent on road performance. Features high clearance belly pan for augmented chassis strength as well as longer adjustable control arms and high clearance crossmember for increased turning radius and higher obstacle clearance.

    310-827-8121
    Store Hours Mon-Sat 9am-6pm PST

    http://www.delreycustoms.com

    http://delreycustoms.myshopify.com/blogs/news

    http://www.ae-33.com

    http://www.facebook.com/AEMarina33

    http://www.twitter.com/delreycustoms

    http://www.yelp.com/biz/al-and-eds-auto-sound-marina-del-rey



    website:http://www.jhmindustry.com/
    Shanghai Jian & Mei Industry and Trade Co., Ltd. is the company which manufacture and export fasteners and metal hardware, founded in 2006, with import-export authority. Now, 80% products export to all over the world and 20% sell in domestic market.

    Related Products

    WhatsApp Online Chat !